53
Click the
Service
tab, and select
User Access Manager
>
Service Configuration
from the navigation tree
to enter the
Service Configuration
page. Then, click
Add
to enter the
Add Service Configuration
page,
and perform the following configurations:
a.
Add a service named
Dot1x auth
and set the
Service Suffix
to
bbb
, which indicates the
authentication domain for the 802.1X user. With the service suffix configured, you must
configure usernames to be sent to the RADIUS service to carry the domain name.
b.
Specify
UserAcct
as the
Charging Plan
.
c.
Select
Deploy VLAN
and set the ID of the VLAN to be assigned to 4.
d.
Configure other parameters according to the actual situation.
e.
Click
OK
to finish the operation.
Figure 18
Add a service
# Add a user. See
.
Click the
User
tab, and select
All Access Users
from the navigation tree to enter the
All Access Users
page. Then, click
Add
to enter the
Add Access User
page, and perform the following configurations:
a.
Select the user or add a user named
test.
b.
Specify the account name as
dot1x
and configure the password.
c.
Select the access service
Dot1x auth
.
d.
Configure other parameters accordingly, and click
OK
to finish the operation.
Содержание A5830 Series
Страница 207: ...199 Figure 62 SFTP client interface ...