HP A5120 EI Series, Справочник по командам

Страница: 75 / 225

67
10.1.1.5 00e0-0000-0000 Static Vlan2
--- 2 dhcp-security item(s) found ---
Table 12 Output description
Field Description
IP Address Client IP address
MAC Address Client MAC address
Type Type of binding, including dynamic, static, and temporary
Interface
Layer 3 interface connecting to the DHCP client. If no interface is recorded in the
binding entry, ―N/A‖ is displayed.
display dhcp relay security statistics
Syntax
display dhcp relay security statistics [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
| : Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide .
begin : Displays the first line that matches the specified regular expression and all lines that follow.
exclude : Displays all lines that do not match the specified regular expression.
include : Displays all lines that match the specified regular expression.
regular-expression : Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display dhcp relay security statistics command to display statistics information about bindings of
DHCP relay agents.
You must enable address check, or IP source guard on the DHCP relay agent before it can generate
dynamic client entries. For more information about IP source guard, see the
Security Configuration Guide .
Examples
# Display statistics about bindings of DHCP relay agents.
<Sysname> display dhcp relay security statistics
Static Items :1
Dynamic Items :0
Temporary Items :0
All Items :1