HP A5120 EI Series, Справочник по командам

Страница: 101 / 225

93
BOOTP client configuration commands
NOTE:

BOOTP client configuration can only be used on VLAN interfaces.

If several VLAN interfaces sharing the same MAC address obtain IP addresses through a BOOTP relay agent,
the BOOTP server cannot be a Windows Server 2000 or Windows Server 2003.
display bootp client
Syntax
display bootp client [ interface interface-type interface-number ] [ | { begin | exclude | include } regular-
expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface interface-type interface-number : Displays the BOOTP client information of the interface.
| : Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide .
begin : Displays the first line that matches the specified regular expression and all lines that follow.
exclude : Displays all lines that do not match the specified regular expression.
include : Displays all lines that match the specified regular expression.
regular-expression : Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display bootp client command to display related information about a BOOTP client.
If interface interface-type interface-number is not specified, the command will display information about
BOOTP clients on all interfaces.
If interface interface-type interface-number is specified, the command will display information about the
BOOTP client on the specified interface.
Examples
# Display related information of the BOOTP client on VLAN-interface 1.
<Sysname> display bootp client interface vlan-interface 1
Vlan-interface1 BOOTP client information:
Allocated IP: 169.254.0.2 255.255.0.0
Transaction ID = 0x3d8a7431
Mac Address 00e0-fc0a-c3ef