11
Procedure
10 Install the PMC bridge adapter (as shown in Figure 4) or the bridge adapt-
er with expansion adapter (as shown in Figure 5) onto the SBC. Align the
GSC connector first, then the tabs on the front panel, and push the boards
together. There are four screws that secure the front bezel, and four screws
that secure the backplane connectors.
Figure 4
Installing the PMC Bridge Adapter onto the SBC
Front Bezel Screws (4)
Connector
Screws (4)
PMC Bridge Adapter
with 2 PMC Cards Installed
GSC Connector
Tabs (4)
