HP A-U200 Скачать руководство пользователя страница 132

Страница: 132 / 148

126

undo nas-ip

View

HWTACACS scheme view

Default level

2: System level

Parameters

ip-address

: IP address in dotted decimal notation. It must be an address of the device and cannot be

0.0.0.0, 255.255.255.255, a class D address, a class E address, or a loopback address.

Description

Use the

nas-ip

command to specify a source address for outgoing HWTACACS packets.

Use the

undo nas-ip

command to restore the default.

By default, the source IP address of an outgoing HWTACACS packet is configured by the

hwtacacs

nas-ip

command in system view; if the

hwtacacs nas-ip

command is not configured, the source IP

address is the IP address of the outbound interface.
The source IP address of HWTACACS packets that a NAS sends must match the IP address of the NAS
that is configured on the HWTACACS server. An HWTACACS server identifies a NAS by IP address.

Upon receiving an HWTACACS packet, an HWTACACS server checks whether the source IP address of

the packet is the IP address of any managed NAS. If yes, the server processes the packet. If not, the server

drops the packet.
If you configure the command repeatedly, only the last configuration takes effect.

NOTE:

The setting configured by the

nas-ip

command in HWTACACS scheme view is only for the HWTACACS

scheme, whereas that configured by the

hwtacacs nas-ip

command in system view is for all HWTACACS

schemes. The setting in HWTACACS scheme view takes precedence.

Related commands:

hwtacacs nas-ip

Examples

# Set the source address for outgoing HWTACACS packets to 10.1.1.1.

<Sysname> system-view

[Sysname] hwtacacs scheme hwt1

[Sysname-hwtacacs-hwt1] nas-ip 10.1.1.1

primary accounting (HWTACACS scheme view)

Syntax

primary accounting

ip-address

[

port-number

]

undo primary accounting

View

HWTACACS scheme view

Default level

2: System level

Содержание A-U200





















































































































































Результаты поиска

Содержание A-U200

Отзывы:

Похожие инструкции для A-U200

Бренды по названию

Популярные бренды

HP A-U200, Справочник по командам

Результаты поиска

Содержание A-U200

Отзывы:

Похожие инструкции для A-U200

Бренды по названию

Популярные бренды