900896-121
4
Replacing the memory module
1.
Align the notched edge of the module with the tab in
the socket, and then press the module into the socket
until it is seated
(1)
, and the side retention clips snap
into place
(2)
.
NOTE
: Memory modules are notched
to prevent incorrect insertion.
2.
To replace the hard drive cage, insert the tabs at the
top of the cage into the slots in the side of the
computer
(1)
, and then rotate the drive cage
downward
(2)
.
3.
Insert the cable into the clip on the drive cage
(1)
, and
then replace the screw
(2)
.
4.
Connect the data and power cables to the back
of the hard drive.
5.
To replace the optical drive, insert the drive into drive
bay in the front of the computer until it locks into place.
6.
Connect the data and power cables to the back
of the optical drive.