background image

ii

 

Legal Notices

The information contained in this document is subject to change without notice.

Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited 
to, the implied warranties of merchantability and fitness for a particular purpose.
 Hewlett-Packard shall 
not be liable for errors contained herein or direct, indirect, special, incidental or consequential damages 
in connection with the furnishing, performance, or use of this material.

Restricted Rights Legend. Use, duplication or disclosure by the U.S. Government is subject to 
restrictions as set forth in subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer 
Software clause at DFARS 252.227-7013 for DOD agencies, and subparagraphs (c) (1) and (c) (2) of the 
Commercial Computer Software Restricted Rights clause at FAR 52.227-19 for other agencies.

HEWLETT-PACKARD COMPANY 3000 Hanover Street Palo Alto, California 94304 U.S.A.

Copyright Notices. Copyright 

 

1983-1998 Hewlett-Packard Company, All Rights Reserved.

Reproduction, adaptation, or translation of this document without prior written permission is prohibited, 
except as allowed under the copyright laws.

Trademark Notices. UNIX is a registered trademark in the United States and other countries, licensed 
exclusively through X/Open Company Limited.

Содержание 9000 EPS20





















Отзывы: