HP 8730w - EliteBook Mobile Workstation Скачать руководство пользователя

Страница: 144 / 164

Recovering your information

To recover information you previously backed up, follow these steps:

If possible, back up all personal files.

Click

Start

All Programs

Accessories

System Tools

Backup

The Backup or Restore Wizard opens.

Click

Restore files and settings

, and then click

Next

Follow the on-screen instructions.

NOTE:

For additional information on initiating a recovery in Windows, perform a search for this topic

in Help and Support.

Recovering the operating system and programs

CAUTION:

The recovery process reformats and completely erases the hard drive. All files you have

created and any software installed on the computer are permanently removed. The recovery process
reinstalls the original operating system, software, and drivers. Software, drivers, and updates not
installed by HP must be manually reinstalled.

To recover your operating system and programs, follow these steps:

If possible, back up all personal files.

Insert the

Operating System

disc into the optical drive.

Shut down the computer.

Turn on the computer.

Follow the on-screen instructions to install the operating system.

After the operating system is installed, remove the

Operating System

disc and insert the

Driver

Recovery

disc.

Follow the on-screen instructions to install the drivers and programs.

134 Chapter 8 Backup and recovery

Содержание 8730w - EliteBook Mobile Workstation





































































































































































Результаты поиска

Содержание 8730w - EliteBook Mobile Workstation

Отзывы:

Похожие инструкции для 8730w - EliteBook Mobile Workstation

Бренды по названию

Популярные бренды

HP 8730w - EliteBook Mobile Workstation, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание 8730w - EliteBook Mobile Workstation

Отзывы:

Похожие инструкции для 8730w - EliteBook Mobile Workstation

Бренды по названию

Популярные бренды