background image

© Copyright 2007, 2008 Hewlett-Packard
Development Company, L.P.

AMD, the AMD Arrow logo, and
combinations thereof, are trademarks of
Advanced Micro Devices, Inc. Bluetooth is
a trademark owned by its proprietor and
used by Hewlett-Packard Company under
license. Intel and Core are trademarks or
registered trademarks of Intel Corporation
or its subsidiaries in the United States and
other countries. Java is a US trademark of
Sun Microsystems, Inc. Microsoft,
Windows, and Windows Vista are either
trademarks or registered trademarks of
Microsoft Corporation in the United States
and/or other countries. SD Logo is a
trademark of its proprietor.

The information contained herein is subject
to change without notice. The only
warranties for HP products and services are
set forth in the express warranty statements
accompanying such products and services.
Nothing herein should be construed as
constituting an additional warranty. HP shall
not be liable for technical or editorial errors
or omissions contained herein.

Third Edition: July 2008

First Edition: June 2007

Document Part Number: 453579-003

Содержание 8710w - HP Mobile Workstation
















































































































































































Отзывы: