Fan
Description
Spare part number
For use with HP EliteBook 8530p computer models or HP EliteBook 8530w computer models
495079-001
For use with HP EliteBook 8530w computer models with Intel QX9300 Quad Core processor
495080-001
Before removing the fan, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 45
).
5.
Remove the following components:
a.
Hard drive (see
Hard drive on page 51
)
b.
Optical drive (see
Optical drive on page 47
)
c.
Keyboard (see
Keyboard on page 61
)
d.
Switch cover (see
Switch cover on page 66
)
e.
Display assembly (see
Display assembly on page 69
)
f.
Top cover (see
Top cover on page 76
)
Remove the fan:
1.
Position the computer right-side up, with the front toward you.
2.
Disconnect the fan cable
(1)
from the system board.
3.
Remove the two Torx 8M2.5x7.0 screws
(2)
that secure the fan to the base enclosure.
4.
Lift the front edge of the fan to remove it from
(3)
from the base enclosure.
Component replacement procedures
81
Содержание 8530w - EliteBook Mobile Workstation
