Hardware options installation 19
Hardware options installation
Introduction
If more than one option is being installed, read the installation instructions for all the hardware options and
identify similar steps to streamline the installation process.
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION:
To prevent damage to electrical components, properly ground the server before
beginning any installation procedure. Improper grounding can cause electrostatic discharge.
Processor option
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION:
To prevent possible server malfunction and damage to the equipment,
multiprocessor configurations must contain processors with the same part number.
CAUTION:
The heatsink thermal interface media is not reusable and must be replaced if the
heatsink is removed from the processor after it has been installed.
IMPORTANT:
Processor socket 1 must be populated at all times or the server does not
function.
To install the processor:
1.
Update the system ROM.
Locate and download the latest ROM version from the Hewlett Packard Enterprise Support Center
website (
http://www.hpe.com/support/hpesc
). Follow the instructions on the website to update the
system ROM.
2.
Power down the server (on page
3.
Remove the server from the chassis (on page
Содержание 828689-002
Страница 37: ...Cabling 37 Front panel LED board assembly cabling ...
Страница 64: ...Support and other resources 64 ...
Страница 65: ...Support and other resources 65 ...
