HP 81104A, Быстрый старт

Страница: 91 / 116

HP 81110/04A Quick Start Getting Started 93
Getting Started
Examples
4 Press the
|LEVELS|
softkey to enter the Levels menu. Switch
ON
both
channels. Change
Separate Outputs
to
Added at Output 1
. Set high
level to
1.00 V
and low level to
0.0 mV
for both outputs.
Figure 44 Current LEVELS Screen
5 Press the
|TIMING|
softkey to enter the Timing menu. Enter a
frequency of
30 MHz
and a delay of
10 ns
for Output 2. Vary output 2
delay to displace the pulse as required.
Output 2 has additional 2.5 ns delay in channel addition mode. Also,
the typical tranisiton times are 5 ns. So, enter transistions of 5 ns for
Output 1 to achieve same transition time shape in the added signal.
NOTE: The
‘-------’
in the width entry fields relate to the NRZ data output
format selection.
Figure 45 Current TIMING Screen