HP 780019-S01, Руководство по техническому обслуживанию и ремонту

Страница: 47 / 105

Removal and replacement procedures 47
5.
Remove all hot-plug hard drives (" Hot-plug SAS/SATA drives and SSDs " on page 22 ).
6.
Disconnect all cables from the hard drive backplane.
7.
Remove the hard drive backplane.
To replace the component, reverse the removal procedure.
8SFF hard drive backplane
To remove the component:
1.
Power down the server (on page 16 ).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
o
Extend the server from the rack (on page 17 ).
o
Remove the server from the rack (on page 17 ).
4.
Remove the access panel (" Access panel " on page 26 ).
5.
Remove all hot-plug hard drives (" Hot-plug SAS/SATA drives and SSDs " on page 22 ).
6.
Disconnect all cables from the hard drive backplane.