1.
Turn the system board upside down.
2.
Release the zero insertion force (ZIF) connector (1) to which the rear-facing webcam is
attached, and then disconnect the rear-facing webcam from the system board.
3.
Remove the rear-facing webcam (2) and cable.
Reverse this procedure to install the rear-facing webcam.
Front-facing webcam
Description
Spare part number
0.3-MP front-facing webcam (includes cable)
785193-001
Before removing the front-facing webcam, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
Back cover on page 11
).
5.
Disconnect the battery cables from the system board (see
Battery on page 13
).
Remove the front-facing webcam:
1.
Release the ZIF connector (1) to which the front-facing webcam cable is attached, and then
disconnect the front-facing webcam cable from the system board.
Front-facing webcam 17
