HP 6602, Краткие характеристики

Страница: 20 / 57

HP RPS 800 Redundant Power Supply - Thailand - English localization JD183A#AKL
Power Cord: Quantity : 1, NEMA 5-15P, C13 STRAIGHT, 250 V, 10 A, 2.5 meters, 8.21 feet , Part
Store #: 8121-0673
HP RPS 800 Redundant Power Supply - China - English localization JD183A#AKM
Power Cord: Quantity : 1, GB 1002, C13 STRAIGHT, 250 V, 10 A, 3 meters, 9.85 feet , Part Store #:
8121-0829
HP RPS 800 Redundant Power Supply - Taiwan - English localization JD183A#ARB
Power Cord: Quantity : 1, CNS 690 Type 2(1), C13 STRAIGHT, 125 V, 13 A, 1.9 meters, 6.24 feet ,
Part Store #: 8121-0964
HP RPS 800 Redundant Power Supply - Argentina - English localization JD183A#ARM
Power Cord: Quantity : 1, IRAM 2073, C13 STRAIGHT, 250 V, 10 A, 3 meters, 9.85 feet , Part Store
#: 8121-0883
Modules Management
Module
slots (JC176A, JG353A, JG776A, JG354A, JG777A Routers Only ) // Not Supported
(JC496A,JC177B,JC178B Router) System (std 0 // max 2) User Selection (min 1 // max 2) install in
Service Engine Module
HP 6600 MCP-X1 Router MPU JG355A
Min 0 // Max 4 SFP1G Transceivers
1 - 2GB DDR3 SDRAM Included (JG482A) See Configuration
Note: 1,4,7,8
Russian Reduced Encryption JG355A#A59
HP 6600 MCP-X2 Router MPU JG356A
Min 0 // Max 4 SFP 1G Transceivers
Min 0 // Max 2 SFP+10G Transceivers
2 - 2GB DDR3 SDRAM Included (JG482A) See Configuration
Note: 1,4,6,7,8
Russian Reduced Encryption JG356A#A59
HP 6600 RPE-X1 Main Processing Unit JC165A
1 - 1GB DDR2 SDRAM Included (JC701A) See Configuration
Note: 1,2,3,4,9
Russian Reduced Encryption JC165A#A59
HP 6600 RSE-X1 Main Processing Unit JC566A
2 - 1GB DDR2 SDRAM Included (JC701A) See Configuration
Note: 1,4,9
Russian Reduced Encryption JC566A#A59
Note 1 No mixing of any type of MPU. Must all be the same sku.
Note 2 If the RPE-X1 (JC165A or JG781A) is selected then the HP 6600RPE-X1 Carrier Card
(JC497A) must be added to order as well.
Note 4 If this product is ordered for delivery to Russia, it must be ordered with the A59 option
(also allowed for other countries desiring Low Encryption), then #A59 is the required
option for BTO, and must be added in addition to #0D1 for CTO.
Note 5 The following Transceivers install into this Module: (Use #0D1 if router is CTO) - if
applicable
HP X120 1G SFP LC SX Transceiver JD118B
HP X120 1G SFP LC LX Transceiver JD119B
HP X125 1G SFP LC LH40 1310nm Transceiver JD061A
HP X120 1G SFP LC LH40 1550nm Transceiver JD062A
QuickSpecs
HP 6600 Router Series
Configuration
DA - 13811 Worldwide — Version 21 — February 18, 2014 Page 20