USB board
Description
Spare part number
USB board (includes cable)
686269-001
Before removing the USB board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery on page 35
), and then remove the following components:
a.
Memory module/wireless module compartment cover (see
Memory module on page 36
)
b.
Keyboard (see
Keyboard on page 39
)
c.
Hard drive (see
Hard drive on page 45
)
d.
Top cover (see
Top cover on page 49
)
Remove the USB board:
1.
Release the ZIF connector to which the USB board cable is connected, and then disconnect
the USB board cable
(1)
from the system board.
2.
Remove the Phillips PM2.5×6.0 screw
(2)
that secures the USB board to the base enclosure.
60
Chapter 4 Removal and replacement procedures
Содержание 655
