HP 64793 Series Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 95

HP 64793 Series Скачать руководство пользователя страница 2

Notice

Hewlett-Packard makes no warranty of any kind with regard to
this material, including, but not limited to, the implied warranties
of merchantability and fitness for a particular purpose.
Hewlett-Packard shall not be liable for errors contained herein or for
incidental or consequential damages in connection with the furnishing,
performance, or use of this material.

Hewlett-Packard assumes no responsibility for the use or reliability of
its software on equipment that is not furnished by Hewlett-Packard.

Copyright 1992, Hewlett-Packard Company.

This document contains proprietary information, which is protected by
copyright. All rights are reserved. No part of this document may be
photocopied, reproduced or translated to another language without the
prior written consent of Hewlett-Packard Company. The information
contained in this document is subject to change without notice.

UNIX is a registered trademark of AT&T.

Torx is a registered trademark of Camcar Division of Textron, Inc.

Hewlett-Packard Company
Colorado Springs Division
8245 North Union Boulevard
Colorado Springs, CO 80920, U.S.A.

«
1
2
3
4
...
»

Содержание 64793 Series
































































































Отзывы:

Нет отзывов