![background image](http://html.mh-extra.com/html/hp/6400cl/6400cl_management-manual_160385535.webp)
IP Routing Features
Configuring OSPF
N o t e
Do not enable redistribution until you have configured the redistribution
filters. Otherwise, the network might get overloaded with routes that you did
not intend to redistribute.
Example:
To configure the switch acting as an ASBR to filter out redistribu
tion of static or connected routes on network 10.0.0.0, enter the following
commands:
HPswitchASBR(config)# router ospf
HPswitch(ospf)# restrict 10.0.0.0 255.0.0.0
HPswitch(ospf)# write memory
N o t e
Redistribution is permitted for all routes by default.
Syntax:
restrict <
ip-addr
> <
ip-mask
> | <
ip-addr
/<
prefix length
>
This command prevents any routes with a destination address that is included
in the range specified by the address/mask pair from being redistributed by
OSPF.
Modifying Default Metric for Redistribution
The default metric is a global parameter that specifies the cost applied to all
OSPF routes by default. The default value is 10. You can assign a cost from 1
– 16,777,215.
Example:
To assign a default metric of 4 to all routes imported into OSPF,
enter the following commands:
HPswitch(config)# router ospf
HPswitch(ospf)# default-metric 4
Syntax:
default-metric <
value
>
The
<
value
>
can be from 1 – 16,777,215. The default is 10.
11-49
Содержание 6400cl
