HP 6000 - ProLiant - 128 MB RAM Скачать руководство пользователя страница 117

Страница: 117 / 257

Place the thermal sensor on top of the hard drive in a position that does not cover the label

(1)

and

attach the thermal sensor to the top of the hard drive with the adhesive strip

(2)

Figure 8-36

Replacing the Thermal Sensor

Slide the cover on the carrier

(1)

and replace the screw on the rear of the carrier to secure the cover

in place

(2)

Figure 8-37

Replacing the Carrier Cover

10.

Slide the hard drive carrier into the enclosure on the computer and lock it with the key provided.

NOTE:

The carrier must be locked for power to be supplied to the hard drive.

Installing and Removing Drives 105

Содержание 6000 - ProLiant - 128 MB RAM


































































































































































































































































Результаты поиска

Содержание 6000 - ProLiant - 128 MB RAM

Отзывы:

HP 6000 - ProLiant - 128 MB RAM, Руководство по техническому обслуживанию и ремонту, Страница: 117 / 257

Результаты поиска

Содержание 6000 - ProLiant - 128 MB RAM

Отзывы: