HP 5900, Справочник по командам

Страница: 194 / 607

181
[Sysname] ospf 1
[Sysname-ospf-1] transmit-pacing interval 30 count 10
vlink-peer (OSPF area view)
Use vlink-peer to configure a virtual link.
Use undo vlink-peer to remove a virtual link.
Syntax
vlink-peer router-id [ dead seconds | hello seconds | { { hmac-md5 | md5 } key-id { cipher cipher-string
| plain plain-string } | simple { cipher cipher-string | plain plain-string } } | retransmit seconds |
trans-delay seconds ] *
undo vlink-peer router-id [ dead | hello | { hmac-md5 | md5 } key-id | retransmit | simple |
trans-delay ] *
Default
No virtual link is configured.
Views
OSPF area view
Predefined user roles
network-admin
Parameters
router-id : Specifies the router ID of the neighbor on the virtual link.
dead seconds : Sets the dead interval in the range of 1 to 32768 seconds. The default is 40. The dead
interval must be identical with that on the virtual link neighbor, and at least four times the hello interval.
hello seconds : Sets the hello interval in the range of 1 to 8192 seconds. The default is 10. It must be
identical with the hello interval on the virtual link neighbor.
hmac-md5 : Specifies the HMAC-MD5 authentication mode.
md5 : Specifies the MD5 authentication mode.
simple : Specifies the simple authentication mode.
key-id : Specifies the key ID for MD5 or HMAC-MD5 authentication, in the range of 1 to 255.
cipher : Sets a ciphertext key.
cipher-string : Specifies a ciphertext key. If simple is specified, the key must be a string of 33 to 41
characters. If
md5
or
hmac-md5
is specified, the key must be a string of 33 to 53 characters.
plain : Sets a plaintext key.
plain-string : Specifies a plaintext key. If simple is specified, the key must be a string of 1 to 8 characters.
If md5 or hmac-md5 is specified, the key must be a string of 1 to 16 characters.
retransmit seconds : Sets the retransmission interval in the range of 1 to 3600 seconds. The default is 5.
trans-delay seconds : Sets the transmission delay interval in the range of 1 to 3600 seconds. The default
is 1.