HP 5850 - Deskjet Color Inkjet Printer, Справочное руководство

Страница: 21 / 249

Computer Setup—Security
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 2-4 Computer Setup—Security
Option Description
Setup Password Allows you to set and enable setup (administrator) password.
NOTE: If the setup password is set, it is required to change Computer Setup options, flash the
ROM, and make changes to certain plug and play settings under Windows.
See the Troubleshooting Guide for more information.
Power-On Password Allows you to set and enable power-on password. The power-on password prompt appears after a
power cycle. If the user does not enter the correct power-on password, the unit will not boot.
NOTE: This password does not appear on warm boots , such as Ctrl + Alt + Delete or Restart from
Windows , unless enabled in Password Options , below.
See the Troubleshooting Guide for more information.
Password Options
(This selection appears
only if a power-on
password or setup
password is set.)
Allows you to:
● Lock legacy resources (appears if a setup password is set)
●
Enable/disable network server mode (appears if a power-on password is set)
● Specify whether the password is required for warm boot ( Ctrl + Alt + Delete ) (appears if a power-
on password is set)
●
Enable/Disable Setup Browse Mode (appears if a setup password is set) (allows viewing, but
not changing, the F10 Setup Options without entering setup password)
See the Desktop Management Guide for more information.
Device Security Allows you to set Device Available/Device Hidden for
● Serial ports
●
Parallel port
● Front USB ports
●
Rear USB ports
● Internal USB ports
●
System audio
● Network controllers (some models)
●
Legacy diskette
● Embedded security device (some models)
Network Service Boot Enables/disables the computer’s ability to boot from an operating system installed on a network
server. (Feature available on NIC models only; the network controller must be either a PCI expansion
card or embedded on the system board.)
Computer Setup (F10) Utilities 9