Welcome
21
Setting up for computer to communicate with a set-top box
(optional step)
You need to configure the computer connections so it can communicate with your set-top box.
Connect an IR emitter (blaster) cable to the computer and your set-top box to use the remote control
properly.
The IR emitter cable is a remote control sensing device that connects to the computer and covers the remote
sensor on a set-top box. When you are selecting TV channels in Windows Media Center, it enables the
remote control to work with your set-top box.
1
Connect the IR emitter cable (
A
) to the IR Out connector (
D
) on the back of the computer.
2
Remove the paper from the backing tape on the end of the cable (
B
), and then press the end of the
cable over the remote IR sensor (receiver) window on the set-top box (
C
). To locate the remote infrared
sensor window, shine a flashlight through the plastic on the front of the set-top box.
3
When you use the remote control, point it at the front of the HP TouchSmart PC (
E
), not at the
set-top box.
D
B
A
C
E
Содержание 575611-001
