Mezzanines
Port Mapping
Port mapping differs slightly between full height and half height server blades due to the support for
additional Mezzanine cards on the full height version.
HP has simplified the processes of mapping Mezzanine ports to switch ports by providing intelligent
management tools via the Onboard Administrator and HP Insight Manager Software. The Onboard
Administrator Guide, Enclosure Setup and Installation Guide provide detailed information on port
mapping.
c7000 Half Height Server Blade
c7000 Full Height Sever Blade
c3000 Half Height Server Blade
c3000 Full Height Sever Blade
The following are supported configurations for the HP Virtual Connect 8Gb 20-port Fibre Channel Module. Please note that other
interconnect options can be installed in the enclosure, but they do not inherit the benefits of Virtual Connect. Switches and Pass-Thru
modules will operate per their default configurations. Any moves, adds, or changes to servers which are connected to non-Virtual
Connect modules will require reconfiguration on the LAN and/or SAN. The Virtual Connect Manager will only manage Virtual Connect
Modules.
The HP Virtual Connect 8Gb 20-port Fibre Channel Module requires a Virtual Connect Ethernet Module installed in the system for
management and administration. The HP Virtual Connect 8Gb 20-port Fibre Channel Module requires VC Firmware version 4.01 or higher
with VC FC Firmware version 1.44.
QuickSpecs
HP Virtual Connect 8Gb 20-Port Fibre Channel Module for
c-Class BladeSystem
Supported Products
DA - 13421 Worldwide — Version 9 — August 30, 2013
Page 4