HP 530 - Notebook PC, Руководство по управлению

Страница: 207 / 562

7-13
Wireless Security Configuration
Wireless Security Overview
When you have decided which security mechanisms to implement in your
network, refer to Table 7-2 and Table 7-3 for a summary of the access point
configuration procedures.
For more details on security configurations that are possible using the CLI,
see
“CLI: Configuring Security Settings” on page 7-24 .
Table 7-2. Summary of Wireless Security Configuration
Configuring Encryption in the ProCurve Wireless Access Point 530
Encryption Methods and
Process WLAN Interface Level Commands Additional
Requirements Notes
No Security security <no security>
Static WEP Keys:
1. Enable WEP Security.
2. Set the Key Index,
Length, and Type.
3. Configure the Keys.
4. Set the Authentication.
security <static-wep>
wep-default-key <1| 2| 3| 4>
[no] wep-key ascii
wep-key-length <64|128>
wep-key <1| 2| 3| 4> <string>
[no] open-system-authentication
[no] shared-key authentication
WEP supported
station required. Requires manual key
management.
Encryption index, length,
and type configured in
the access point must
match those configured
in the stations.
Dynamic WEP:
1. Enable Dynamic WEP
Security.
2. Set the Authentication
Server and Protocol.
3. Set RADIUS Key.
security <dynamic-wep>
radius-accounting < primary | secondary > < ip
< ip> | port < port> | key <key> >
radius < primary | secondary >
*The radius-key value is used with an external
RADIUS server only and is ignored for the
internal radius server. It should be set to the
shared secret key that is configured on the
external RADIUS server.
RADIUS server
required.
802.1X
supplicant
required.
WEP supported
station required. The built-in
authentication server
can be used on the
access point or on an
external RADIUS server.
To use the built-in
authentication server,
set the RADIUS IP
address to that used by
the built-in server, and
turn RADIUS accounting
off (because it is not
supported by the built-in
server).