Removal and replacement procedures
Maintenance and Service Guide
4–9
5. Grasp the Mylar tab
1
on the hard drive and slide the hard drive
2
to the right.
6. Remove the hard drive
3
from the hard drive bay.
7. If it is necessary to replace the hard drive bracket, follow these steps:
a. Remove the two Phillips PM3.0×4.0 screws
1
from each side of the hard drive.
b. Lift the bracket
2
straight up to remove it from the hard drive.
Reverse this procedure to reassemble and install the hard drive.
Содержание 512424-001
Страница 23: ...3 2 Maintenance and Service Guide Illustrated parts catalog Computer major components ...
Страница 119: ...7 4 Maintenance and Service Guide Screw listing Where used 2 screws that secure the system board to the base enclosure ...
Страница 121: ...7 6 Maintenance and Service Guide Screw listing Where used One screw that secures the SIM slot board to the computer ...