238
[Sysname-pki-cert-acp-mypolicy] rule 1 permit mygroup
state
Syntax
state
state-name
undo state
View
PKI entity view
Default level
2: System level
Parameters
state-name
: Specifies a state or province name, a case-insensitive string of 1 to 31 characters. No comma
can be included.
Description
Use the
state
command to specify the name of the state or province where an entity resides.
Use the
undo state
command to remove the configuration.
By default, no state or province is specified.
Examples
# Specify the state where an entity resides.
<Sysname> system-view
[Sysname] pki entity 1
[Sysname-pki-entity-1] state country
