176
port-security timer disableport
Syntax
port-security timer disableport
time-value
undo port-security timer disableport
View
System view
Default level
2: System level
Parameters
time-value
: Specifies the silence period during which the port remains disabled, in seconds. It ranges
from 20 to 300.
Description
Use the
port-security timer disableport
command to set the silence period during which the port remains
disabled.
Use the
undo port-security timer disableport
command to restore the default.
By default, the silence period is 20 seconds.
If you configure the intrusion protection policy as disabling the port temporarily whenever it receives an
illegal frame, use this command to set the silence period.
Related commands:
display port-security
.
Examples
# Configure the intrusion protection policy as disabling the port temporarily whenever it receives an
illegal frame and set the silence period to 30 seconds.
<Sysname> system-view
[Sysname] port-security timer disableport 30
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] port-security intrusion-mode disableport-temporarily
port-security trap
Syntax
port-security trap
{
addresslearned
|
dot1xlogfailure
|
dot1xlogoff
|
dot1xlogon
|
intrusion
|
ralmlogfailure
|
ralmlogoff
|
ralmlogon
}
undo port-security trap
{
addresslearned
|
dot1xlogfailure
|
dot1xlogoff
|
dot1xlogon
|
intrusion
|
ralmlogfailure
|
ralmlogoff
|
ralmlogon
}
View
System view
Default level
2: System level
