![HP 4510s - ProBook - Celeron 1.8 GHz Скачать руководство пользователя страница 119](http://html.mh-extra.com/html/hp/4510s-probook-celeron-1-8-ghz/4510s-probook-celeron-1-8-ghz_maintenance-and-service-manual_160698119.webp)
3.
Disconnect the fan cable from the system board
(8)
, and then remove the heat sink
(9)
.
NOTE:
The thermal material must be thoroughly cleaned from the surfaces of the system board
(1)
,
(2)
, and
(3)
, and the heat sink components
(4)
,
(5)
, and
(6)
each time the heat sink is removed.
Replacement thermal material is included with all heat sink, system board, and processor spare
part kits.
NOTE:
Steps 4 through 6 apply to computers with UMA subsystem memory. Steps 1 through 3
apply to computers with discrete subsystem memory. Step 7 shows how to remove the fan from
the heat sink.
4.
Position the computer right-side up with the front toward you.
5.
Following the sequence stamped into the heat sink, loosen the five screws
(1)
,
(2)
,
(3)
,
(4)
,
(5)
around the processor.
Component replacement procedures 107
Содержание 4510s - ProBook - Celeron 1.8 GHz
