HP 4396A, Руководство по эксплуатации

Страница: 8 / 21

HP 4396A
T est Equipment
T able 1-3 lists the required equipment to perform the performance test.
T able 1-3. Recommended T est Equipment
Equipment Name Model or HP P art Number Qty
Frequency Counter HP 5343A Opt. 001 or HP 5334B Opt.010 or
HP 5335A Opt.010
1
1
Frequency Standard
2
HP 5061B 1
Spectrum Analyzer HP 8566A/B 1
Network Analyzer HP 8753A/B/C 1
P ower Meter HP 436A Opt. 022 or HP 437B or HP 438A 1
P ower Sensor HP 8482A 1
P ower Sensor HP 8481D 1
Function Genarator HP 3325A 1
Signal Generator
3
HP 8663A or HP 8642B 2
Step Attenuator
4
HP 8496A/G Option 001 and H60
5
1
Step Attenuator
4
HP 8494A/G Option 001 and H60
6
1
Attenuator/Switch Driver HP 11713A
7
1
50 Type-N Calibration Kit HP 85032B 1
T/R T est Set HP 85044A 1
50 MHz Low P ass Filter PN 0955-0306 1
50 termination, type-N(m) HP 909C Opt 012 or part of HP 85032B
8
3
6 dB Fixed Attenuation, 50 HP 8491A Opt 006 2
6 dB Fixed Attenuation, 50 , VSWR 1.015 HP 8491A Opt 006 & Opt H60
9
2
Two-way P ower Splitter HP 11667A 1
N(m)-N(m) cable , 50 HP 11500B or part of HP 11851B
10
4
RF cable kit HP 11851B 1
1 Option 001 or 010 (optional time base) is not required, when a frequency standard in T able 1-3 is available .
2 Required for testing an analyzer equipped with Option 1D5 (High Stability Frequency Reference).
3 The \HPxxxx 2" type model number is assigned to the \Signal Generator 2", while the nomal \HPxxxx" is
used for the \Signal Generator 1". This makes us possible to use two signal generators of the same model.
4 Calibration values at 50 MHz are required in the tests . See the Calibration Data R equired for Step
Attenuators later in this chapter .
5 An HP 8496A/G step attenuator with required low VSWR ( 1.02) can be purchased by specifying option H60.
6 An HP 8494A/G step attenuator with required low VSWR ( 1.02) can be purchased by specifying option H60.
7 Required when an HP 8494G or HP 8496G step attenuator is used in the tests .
8 The HP 85032B includes a type-N(m) 50 termination.
9 An HP 8491A Opt. 006 xed attenuator with required low VSWR ( 1.015) can be purchased by specifying
Opt. H60.
10 The HP 11851B includes three N(m)-N(m) cables of 61 cm and a N(m)-N(m) cable of 88 cm.
General Information 1-3