manualshive.com logo in svg
  • Главная
  • /
  • HP
  • /
  • 410C
  • /
  • Организационное, ДС, ГС и ремонтное руководство на уровне базы

HP 410C, Организационное, ДС, ГС и ремонтное руководство на уровне базы, Страница: 4 / 64

Поделиться
Скачать
HP 410C Скачать руководство пользователя страница 4

TM 11-6625-1614-15

Section

Number

1-1.

3-1.
5-1.
5-2.
5-3.
5-4.
5-5.

5-6.
5-7.
5-8.
5-9.
5-10.

Number

1-1.

2-1.
2-2.
2-3.
2-4.

3-1.
3-2.

3-3.
3-4.
3-5.

3-6.
3-7.
3-8.

4-1.
4-2.
4-3.

5 - 7 .
5 - 9 .
5 - 1 0 .
5 - 1 3 .
5 - 1 6 .
5 - 1 7 .
5 - 2 1 .
5 - 2 2 .
5 - 2 6 .
5 - 2 8 .
5 - 2 9 .
5 - 3 0 .
5 - 3 1 .
5 - 3 3 .
5 - 3 4 .
5 - 3 5 .
5 - 3 6 .
5 - 4 5 .
5 - 4 8 .

Alternate Voltage Source --------------------------------------------------------------------------
Mechanical Meter Zero ----------------------------------------------------------------------------
DC Voltmeter OWration --------------------------------------------------------------------------
DC Ammeter Operation ---------------------------------------------------------------------------
Ohmmeter Operation ------------------------------------------------------------------------------
Amplifier Operation --------------------------------------------------------------------------------
DC Amplifier Output Impedance Check -------------------------------------------------------
AC Voltmeter Operation --------------------------------------------------------------------------

Adjustment and Calibration Prmedure --------------------------------------------------------------

Chopper Frequency Adjust -----------------------------------------------------------------------
Power Supply Adjustment ------------------------------------------------------------------------
DC Zero Adjustment and Bias -------------------------------------------------------------------
DC Amplifier Output Adjust ---------------------------------------------------------------------
Ohms Adjust (R3)-----------------------------------------------------------------------------------
AC Zero Adjust -------------------------------------------------------------------------------------
AC Full Scale Adjust (.5 V Range) --------------------------------------------------------------

Troubleshooting Procedure -----------------------------------------------------------------------------

Servicing Etched Circuit Boards -----------------------------------------------------------------
Chopper, Assembly Installation -----------------------------------------------------------------

LIST OF TABLES

Specifications ------------------------------------------------------------------------------------------------------------
Possible Eror When Measuring Voltage of Complex Waveforms -------------------------------------------
Recommended Test Equipment -------------------------------------------------------------------------------------
DCV Accuracy Test ----------------------------------------------------------------------------------------------------
DCV Input Resistance Test -------------------------------------------------------------------------------------------
DCA Accuracy Test ----------------------------------------------------------------------------------------------------
Deleted

AC Accuracy Test ------------------------------------------------------------------------------------------------------
Power Supply Test -----------------------------------------------------------------------------------------------------
AC Full Scale Adjust --------------------------------------------------------------------------------------------------
Front Panel Troubleshooting Prmedure --------------------------------------------------------------------------
Troubleshooting Prwedure ------------------------------------------------------------------------------------------

LIST OF ILLUSTRATIONS

The Combining Case                                                                                                                                                                                                     
Steps to Place Instrument in Combining Case--------------------------------------------------------------------
Adaptor Frame Instrument Combination                                                                                                                                                 
T

WO 

Half Modules in Rack Adaptor -------------------------------------------------------------------------------

Front and Rear Panel Controls --------------------------------------------------------------------------------------
DC Voltage Measurements                                                                                                                                                                                     
DC Current Measurements                                                                                                                                                                                     
AD Voltage Measurements                                                                                                                                                                                     
Maximum AC Voltage Chart for 11036A Probe                                                                                                                                 

Graph Used in Calculation of Pulse Voltage Readings                                                                                                                 
Resistance Measurements                                                                                                                                                                                         
DC Nano-Ampere Current Measurements                                                                                                                                               
Block Diagram, Model  410C                                                                                                                                                                                 
Modulator - Demodulator Mechanical Analogy                                                                                                                               
Simplified Schematic, DC Current Measurement ---------------------------------------------------------------

Page

5- 1
5-1
5-1
5-2
5-4
5-4

5-5
5-5
5-8
5-8
5-9
5-10
5-10
5-11
5-12
5-12
5-12
5-14
5-15

1-3

3-3
5-0
5-2
5-3
5-3

5-6
5-9
5-13
5-16
5-17

The

Model 410C Electronic Voltmeter

Page

1-0

2-0
2-0
2-1
2-2
3-2

3-5
3-6
3-7
3-8
3-9
3-10
3-11

4-0
4-0
4-3

ii

Содержание 410C

































































Отзывы:

Нет отзывов