HP 400338-001 - KVM Switch, Руководство пользователя

Страница: 26 / 213

Rackmount Console Switch Owner’s Manual
www.hp.com/racksolutions
20
Basic Port Maintenance is performed from the Administrator Command Menu,
and is available if you are operating in non-secure mode or if you are the system
administrator. Here you can add, delete or edit ports.
Basic Port
Maintenance
THE ADD PORT WINDOW
Hewlett Packard Console Switch
Add Port
ENTER = save ESC = exit
Name
Address
ID Dwell Time 5
Scan Dwell Time 5
ID Setup
Save Changes
Adding Ports
1. Select ‘Add Port’ from the Administrator Command Menu or press the
Insert key. Type in a new port name, up to 14 characters long, and
press
Enter
.
2. Type in the address for the server you are naming and press
Enter
. Please
note that the address cannot be longer than two digits.
3. Enter the dwell time for the ID Window and press
Enter
.
4. Enter the dwell time for scanning and press
Enter.
5. After selecting “ID Setup”, use the arrow keys to position the ID window to
where you would like it to appear when this port is selected. Then press
Enter
.
(For further information see ‘The ID Window’ later in this chapter.)
Press Esc at any point to exit this operation without adding the port.