Specifications 11
Specifications
UTP cable specifications
The HP Ethernet 1Gb 4-port 366T adapter can use existing UTP CAT5 (or better) cable to deliver Gigabit
Ethernet over copper, according to the IEEE 802.3ab specifications. For new installations, CAT5e (enhanced
CAT5) cable is recommended.
Maximum distances for Gigabit over copper cable are 100 meters (328 feet).
To connect to the network, the HP Ethernet 1Gb 4-port 366T uses the following cable for 1000Base-T
transmission:
•
CAT5 UTP or better twisted-pair
•
22-26 AWG, 100
Ω
@ 1 MHz
•
EIA/TIA 568a or EIA/TIA 568b
General specifications
Specification
Value
Controller
Intel I350
Data rate
1 Gb/s per port, 2 Gb/s combined, full-duplex
PCI bus
PCI Express x4 Gen2
Connectors
2 RJ-45
Dimensions (LxW)
13.4 cm x 5.6 cm (5.3 x 2.2 inches) without bracket
Compliance
Compliance
Standard
IEEE
IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3x, IEEE802.3ad, IEEE802.1p,
IEEE802.1q,IEEE1588
Safety
UL Mark (US and Canada)
EN 60950
Other
PCIe v2.0
RoHS 6 of 6
IPv4, IPv6
CE
Microsoft Windows Hardware Quality Labs
Server Design Guide version 3.0
SNMP
IPv4, TCP and UDP Checksum Offload
IPv4/IPv6 TCP, Large Send Offload
Receive-Side Scaling
Jumbo Frames up to 9.5 KBytes
