Power connector cable
Description
Spare part number
Power connector cable
746660-001
Before removing the power connector cable, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the Battery (see
Battery on page 29
), and then remove the following components:
a.
Service cover (see
Service cover on page 30
)
b.
Hard drive (see
Hard drive on page 31
)
c.
Optical drive (see
Optical drive on page 37
)
d.
Keyboard (see
Keyboard on page 38
)
e.
Top cover (see
Top cover on page 41
)
f.
Speakers (see
Speakers on page 49
)
g.
System board (see
System board on page 52
)
Remove the power connector cable:
1.
Release the display panel cable (1) from the routing channel built into the base enclosure.
2.
Release the power connector cable (2) from the routing channel built into the base enclosure.
3.
Release the power connector (3) from the molding built into the base enclosure.
4.
Remove the power connector cable.
62
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
