background image

Item

Description

Spare part number

(5)

Memory modules

 (2, PC2-6400, 800-MHz, DDR2)

 4-GB

492572-001

 2-GB

492571-001

 1-GB

492570-001

(6)

Top cover

 (includes TouchPad board and cable, TouchPad button board and cable, and

TouchPad bracket)

 

 

With fingerprint reader

492557-001

 

Without fingerprint reader

514059-001

(7)

Speaker

481109-001

(8)

ExpressCard assembly

492567-001

 

Plastics Kit

 (See 

Plastics Kit on page 31

 for more Plastics Kit spare part information):

492577-001

(9a)

ExpressCard slot bezel

(9b)

Bluetooth module compartment cover

(9c)

Wireless module compartment cover

(9d)

Memory module compartment cover

(9e)

Hard drive cover

NOTE:

The 4.57-cm (1.80-inch) primary hard drive must be installed in the hard drive bay. Installation of this drive

in the optical drive bay is not supported.

(10)

LED board

 (includes cable and Mylar cover)

499209-001

(11)

System board

 (includes processor, replacement thermal material, and replacement

thermal material cleaning kit)

 

 

With LV SL9600 processor

513947-001

 

With LV SL9400 processor

492552-001

 

With LV SL9300 processor

492551-001

 

With ULV SU9400 processor

513946-001

 

With ULV SU9300 processor

492553-001

(12)

Modem module

NOTE:

The modem module spare part kit does not include a modem module cable. The modem module cable is

included in the Cable Kit, spare part number 492555-001.

 

For use in all countries and regions except Australia and New Zealand

461750-001

 

For use only in Australia and New Zealand

461750-011

(13)

Fan

492568-001

(14)

Heat sink

 (includes replacement thermal material and replacement thermal material

cleaning kit)

492582–001

(15)

Optical drive

 (includes bezel and bracket)

 

DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive

492559-001

Computer major components

23

Содержание 2530p - EliteBook - Core 2 Duo 2.13 GHz








































































































































































Отзывы: