manualshive.com logo in svg

HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive, Справочное руководство

Поделиться
Скачать
HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive Скачать руководство пользователя страница 43

Regulatory Compliance Notices

43

HP StorageWorks 1000 Modular Smart Array Reference Guide

BSMI Notice

Japanese Power Cord Notice

Laser Compliance

The SFP Module contains a laser diode of either gallium aluminum arsenide 
(GaALAs) emitting in the wavelength range of 770-860 nm, or indium gallium 
arsenide phosphide (InGaAsP) emitting in the wavelength range of 1270-1355 
nm. All HP systems equipped with a laser device comply with safety standards, 
including International Electrotechnical Commission (IEC) 825. With specific 
regard to the laser, the equipment complies with laser product performance 
standards set by government agencies as a Class 1 laser product. The product does 
not emit hazardous laser radiation.

WARNING:  

Use of controls or adjustments or performance of procedures 

other than those specified herein or in the laser product’s installation guide 

may result in hazardous radiation exposure. To reduce the risk of exposure to 

hazardous radiation:

■

Do not try to open the unit enclosure. There are no user-serviceable 

components inside.

■

Do not operate controls, make adjustments, or perform procedures to the 

laser device other than those specified herein.

■

Allow only HP Authorized Service technicians to repair the unit.

Содержание 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды