HP 200 G4 22 Скачать руководство пользователя страница 63 | Manualshive

Страница: 63 / 101

background image

Unable to access data on the media card after inserting it into a slot.

Cause

Solution

The media card is not inserted properly, is inserted in the wrong
slot, or is not supported.

Ensure that the card is inserted properly with the gold contact on
the correct side. The green LED will light if inserted properly.

Do not know how to remove a media card correctly.

Cause

Solution

The computer’s software is used to safely eject the card.

In Windows 10, type

file

in the taskbar search box, and then

select File Explorer from the list of applications. In the left
column, expand This PC, right-click on the corresponding drive
icon, and then select Eject. Pull the card out of the slot.

NOTE:

Never remove the card when the green LED is flashing

After installing the media card reader and booting to Windows, the reader and the inserted cards are not recognized by
the computer.

Cause

Solution

The operating system needs time to recognize the device if
the reader was just installed into the computer and you are
turning the PC on for the first time.

Wait a few seconds so that the operating system can recognize
the reader and the available ports, and then recognize the media
inserted in the reader.

After inserting a media card in the reader, the computer attempts to boot from the media card.

Cause

Solution

The inserted media card has boot capability.

1.

If you do not want to boot from the media card, remove it
during boot or do not select the option to boot from
the inserted media card during the boot process.

2.

During POST (Power On Self-Test), press

f9

to modify

the boot menu.

3.

Change the boot sequence in F10 Computer Setup.

Solving audio problems

If the computer has audio features and you encounter audio problems, see the common causes and solutions
listed in the following table.

Sound cuts in and out.

Cause

Solution

Processor resources are being used by other open applications.

Shut down all open processor-intensive applications.

Solving audio problems

53

«
...
61
62
63
64
65
...
»

Содержание 200 G4 22






































































































Отзывы:

Нет отзывов

Похожие инструкции для 200 G4 22

Бренд: CompuLab Страницы: 19

Бренд: Zenith Страницы: 98

Бренд: DFI Страницы: 69

Бренд: IBASE Technology Страницы: 32

Бренд: Avid Technology Страницы: 23

Бренд: Acer Страницы: 84

Бренд: Vivo Страницы: 16

Бренд: Toshiba Страницы: 5

Бренд: Toshiba Страницы: 5

Бренд: Toshiba Страницы: 5

Бренд: Toshiba Страницы: 5

Бренд: Toshiba Страницы: 5

Бренд: Toshiba Страницы: 4

Бренд: Toshiba Страницы: 1

Бренд: Toshiba Страницы: 4

Бренд: Toshiba Страницы: 5

Бренд: Toshiba Страницы: 2

Equium 7300S SERIES

Бренд: Toshiba Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды