3.
Remove the battery (see
4.
Remove the right speaker (see
Remove the fingerprint reader:
1.
Disconnect the cable from the ZIF connector on the fingerprint reader board (1).
2.
Remove the Phillips M2.0 × 3.0 screw (2) that secures the fingerprint reader bracket to the computer.
3.
Remove the bracket from on top of the fingerprint reader (3).
4.
Remove the fingerprint reader from the computer (4).
Reverse this procedure to install the fingerprint reader.
Fan
To remove the fan, use this procedure and illustration.
Table 5-9
Fan description and part number
Description
Spare part number
Fan
M08945-001
Before removing the fan, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly on page 27
).
2.
Remove the bottom cover (
3.
Remove the battery (see
Remove the fan:
Component replacement procedures
37
Содержание 15-cw1000
Страница 4: ...iv Safety warning notice ...
Страница 8: ...viii ...
Страница 58: ...50 Chapter 5 Removal and replacement procedures for authorized service provider parts ...