manualshive.com logo in svg

HP 15-af131dx, Руководство по обслуживанию, Страница: 59 / 128

Поделиться
Скачать
HP 15-af131dx Скачать руководство пользователя страница 59

Heat sink assembly

NOTE:

The heat sink assembly spare part kit includes replacement thermal materials.

Description

Spare part number

Heat sink for use in models with discrete graphics memory and Intel Core processors

815238-001

Heat sink for use in models with UMA graphics memory and Intel Core processors (except for Pentium 
N3540)

815237-001

Heat sink for use in models with discrete graphics memory and Intel Pentium or Celeron processors

816604-001

Heat sink for use in models with UMA graphics memory and Intel Pentium or Celeron processors

816603-001

Heat sink for use in models with UMA graphics and an Intel Pentium N3540 processor

833733-001

NOTE:

To properly ventilate the computer, allow at least 7.6 cm (3.0 in) of clearance on the left side of the 

computer. The computer uses an electric fan for ventilation. The fan is controlled by a temperature sensor and 
is designed to turn on automatically when high temperature conditions exist. These conditions are affected by 
high external temperatures, system power consumption, power management/battery conservation 
configurations, battery fast charging, and software requirements. Exhaust air is displaced through the 
ventilation grill located on the left side of the computer.

Before removing the heat sink assembly, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the 
computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then 
unplugging the AC adapter from the computer.

4.

Remove the battery (see 

Battery on page 32

).

5.

Remove the optical drive (see 

Optical drive on page 33

), if installed.

6.

Remove the bottom cover (see 

Bottom cover on page 39

).

To remove the heat sink assembly:

1.

Refer to the following heat sink removal image that matches your computer.

2.

Loosen the screws on the heat sink that secure the heat sink assembly to the system board.

Component replacement procedures

51

Содержание 15-af131dx

































































































































Отзывы:

Нет отзывов