![background image](http://html.mh-extra.com/html/hp/14-bf000/14-bf000_maintenance-and-service-manual_160518044.webp)
M.2 solid-state drive adapter bracket and board
Description
Spare part number
Solid-state drive adapter bracket
L00160-001
Solid-state drive adapter board
L00159-001
Solid-state drive board cable
L01440-001
Before removing the solid-state drive adapter bracket and board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
5.
Remove the battery (see
).
To remove the solid-state drive adapter bracket and board:
1.
Disconnect the cable from the system board connector (1).
2.
Remove the three Phillips PM2.0×3.0 screws (2) that secure the bracket to the computer.
3.
Lift the bracket and board assembly out of the computer (3)
36
Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Содержание 14-bf000
