Getting Started
2-17
Writer: Debbie Thomson Saved By: Debbie L. Thomson Saved Date: 07/08/99 3:10 PM
Pages: 19 Words: 2941 Template: c:\msoffice\templates\comm.dot
File Name d-Ch2.doc Part Number 120988-002
Error
Conditions
Keyboard
LED Color
Keyboard
LED Activity
State/Message
Num Lock
Green
Flashing
System memory is not present
or is incompatible.
Caps Lock
Green
Flashing
Graphics controller is not
present or is incorrectly
initialized.
Scroll Lock
Green
Flashing
System board hardware failure
prior to graphics.
Num, Caps, Scroll Lock
Green
Chasing
(cycling from
left to right,
continuously)
Keyboard is locked in network
server mode.
FailSafe Boot
Block Mode
Keyboard
LED Color
Keyboard
LED Activity
State/Message
Num Lock
Green
On
ROMPaq diskette not present,
is bad, or drive not ready.*
The screen displays a Boot
Block Recovery message when
using an embedded graphics
controller, or a PCI or AGP
graphics controller card.
Caps Lock
Green
On
Enter password.*
Num, Caps, Scroll Lock
Green
Turn on and
off 2 times
(accompanied
by 1 long
and 3 short
beeps)
ROM flash failed.*
Num, Caps, Scroll Lock
Green
On
Boot Block ROM Flash
successful. Turn power off, then
on to reboot.
Note: Diagnostic lights do not flash on USB keyboards.
*Insert valid ROMPaq diskette in drive A. Turn power switch off, then on to reflash ROM. If ROM
flash is successful, all three keyboard LEDs will light up and you will hear a rising tone series of
beeps. Remove diskette and turn power off, then on to restart the computer. For more information
about flashing the ROM, refer to the
Troubleshooting Guide.
