HP 1032 Скачать руководство пользователя

Страница: 81 / 173

have exceeded their thresholds.

closed_Excl - The host is not accepting jobs until the exclusive job

running on it completes.

closed_Full - The host is not accepting new jobs. The configured

maximum number of jobs that can run on it has been reached.

closed_Wind - The host is not accepting jobs. The dispatch window that

has been defined for it is closed.

unlicensed - The host is not accepting jobs. It does not have a valid LSF

license for sbatchd and LIM is down.

closed_Lim - The LIM on the host is unreachable, but sbatchd is running.

unavail - The LIM on the host is not responding and sbatchd is down.

unreach - The sbatchd is down.

unreach - The sbatchd is down and LIM is unreachable

References:

3.7.8 How do I access the Clusterware Pro V5.1 Web Interface?

3.7.9 How do I access the Clusterware Pro V5.1 Command Line Interface?

1.7.2 Get an Overview of the Job Queue Status

Using the Clusterware Pro V5.1 Web Interface:

Select the Queues tab. An overview of available job queues is displayed. The following
details are displayed:

State - The state of the queue. Any queue with an "Open:Active" state

can accept new jobs.

Jobs Pending - The number of jobs pending in that queue.

Jobs Running - The number of jobs running in that queue.

Priority - The relative priority of the queue.

Using the Clusterware Pro V5.1 CLI:

From the CLI issue the following command.

% bqueues

By default bqueues returns the following information about all queues: queue name, queue
priority, queue status, job slot statistics, and job state statistics.

Additional information is available for all hosts in the cluster, or for a single hostname.

% bqueues -l

Содержание 1032







































































































































































Результаты поиска

Содержание 1032

Отзывы:

Похожие инструкции для 1032

Бренды по названию

Популярные бренды

HP 1032, Руководство пользователя

Результаты поиска

Содержание 1032

Отзывы:

Похожие инструкции для 1032

Бренды по названию

Популярные бренды