![HP 04H8095 Скачать руководство пользователя страница 19](http://html.mh-extra.com/html/hp/04h8095/04h8095_installation-manual_163458019.webp)
4 Connecting to a Windows NT Server 4.0
Windows NT Workstation Version 4.0
4 Connecting to a Windows NT Server 4.0
Windows NT
Workstation
Version 4.0
Requirements
•
HP Vectra with Microsoft Windows NT Workstation 4.0 installed.
•
IBM AUTO LANStreamer PCI Drivers diskettes Ver. 3.04
•
Driver Name: OEMSETUP.inf Size: 67KB Date: 10/18/96
•
Microsoft Windows NT Workstation 4.0 and Service Pack Media.
•
Microsoft Windows NT Server 4.0 machine that supports Net BEUI, TCP/
IP, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.
Device Configuration
•
I/O Base Address
FC00h
•
Interrupt Request Level
9
Procedure
1
With the HP Vectra turned off install the IBM LANStreamer 16/4 PCI TR
adapter card into a PCI slot.
2
Insert the IBM LANStreamer TR drivers disk 1 of 6 (AUTO LANStreamer
PCI Diagnostic Disk) and power on the machine.
3
After the machine boots, verify that the adapter finished testing and that
the adapter is “OK.”
4
Click on “F3” to exit, and then press “CTRL+ALT+DEL.”
5
After windows loads, log into NT workstation with administrator
privileges. (If you do not have the required information, contact your
network administrator)
6
Click on “Start”, up to “Settings”, and open “Control Panel.”
7
Select the “Network” icon in the “Control Panel” program group.
8
Click on “YES” in the “Network Settings“ dialog box, and NT Networking
will be installed on your computer.
9
With “Wired to the Network” checked, click on “Next.”
10
Click on “Select from List”, then click “Have Disk.”
Содержание 04H8095
Страница 1: ...Auto LANstreamer PCI Adapter 04H8095 Installation Guide ...
Страница 27: ......
Страница 28: ...Version Number Lans PCI Rev 1 ...