30
ENGLISH
INSTRUCTION MANUAL
Fit the burner unit to the stand using the 4 M6 ×
10 mm bolts (a).
Check that the stand and burner are correctly
assembled, re-tighten all nuts.
Place an 8 mm washer (g) on each reflector bolt.
Secure the reflector (i) using 3 washers and 3 M8
dome nuts (h).
Lift the gas bottle housing and let it rest on the
stand plate.
Screw the threaded end of the gas inlet hose into
the regulator.
Click the regulator (j) into place on the gas bottle
valve.
Place the gas bottle on the foot.
Testing for leaks
Check all connections for leaks before use.
Prepare a solution of soapy water using washing-
up liquid. Apply the solution to all valves, hoses
and connections including the regulator. Open the
regulator. If there are any leaks, they will form
bubbles. Close the regulator, tighten any leaky
connections and re-open the regulator.
Always perform the leak test with a full gas bottle.
Smoking is strictly forbidden when testing for
leaks!
