HOZAN L-546-10, Инструкция по эксплуатации

Страница: 6 / 8

Precautions
1.
Do not disassemble or modify the eyepieces yourself, otherwise this could
cause a malfunction
.
2. Protect the unit against physical shock or vibration during transport. Otherwise, this
could cause a malfunction.
3. Do not expose the unit to prolonged direct sunlight, high temperature, high humidity,
or dust. Such exposure could cause a malfunction.

Caution
These symbols are used throughout the instruction manual to alert the user to potential
safety hazards as follows :

Warning
…
Notice when incorrect handling could cause the user's death or serious
injury.

Caution
…
Notice when incorrect handling could cause injury to the user or material
damage.
Even if the instructions do not have

Caution mark, there are some possibilities for a
serious situation. Follow the instructions.
Warning and caution symbols
Preparation
First, make sure that the contents are complete.
Prepare the L
-
46 MICROSCOPE or the L
-
461
STEREO HEAD SCOPE.
Remove the caps from the barrels. Then, loosen
the eyepiece set screws and insert the eyepiec-
es into the barrels.
Drive the eyepiece set screws gently so that the
eyepieces stay and the setting dot [
・
] of them,
refer to the photo, point at the zenith.
Please use eyecups (long) if necessary.
< How to attach the eyecup (long) >
1. Remove the eyecup (short) .
2. Attach the eyecup (long) as sown
in the illustration.
Choose to suit
Eyecup (short)
・
for persons in spectacles
Eyecup (long)
・
for persons in contact lenses or without spectacles
Bringing inspector’s cheekbones at eyecups (long) stables his/her eye
points.
・
for blocking the slanting rays
Engage the
projection with
the groove.
Eyepiece
Eyecup (long)
Setting dot
Eyepiece
Eyecup (short)
Eyepiece set screw
* Please refer to each instruction manual for operation of the L - 46 and the L - 461.
２ ２ ２ ２
１ １ １ １