１
Be agreed “0” of the graduation with each setting dot,
refer to the photo, of both the eyepieces.
Keep this setting since the right and left eyesight will be
adjusted at the main unit side (refer to
6
of page 5).
Operation
Setting
dot
４
５
Adjust for proper focus with the focus
knob while looking with both eyes.
If the focus knob does not focus
enough, move the holder up and
down under loosening the holder set
knob.
Holder set knob
Focus knob
Loosen the holder set knob while supporting the holder with one hand when move it
up and down. Otherwise, the holder could fall down suddenly damaging the unit, the
object and the operator.
Caution
Adapt the eyepiece distance with your pupil distance to
view a single circle of the field.
The stereo barrels will rotate drawing arcs interlocking
with (refer to the photo).
３
Place an object just under the objectives.
Prepare lighting apparatus such as Hozan’s L-711 LED
LIGHT (refer to page 6) if necessary.
４
Always aim the same point if the sur-
face of the object is not simply flat,
otherwise the working distance* could
differ from before and this could not
come into focus.
*Working distance means the dimen-
sion from the top of lens filter to the
object.
２
Rotate both the sight adjust rings so that
the silvery setting lines are barely visible.
Sight adjust ring
Setting line
