HOZAN C-445, Инструкция по эксплуатации

Страница: 6 / 8

Warning and caution symbols
These symbols are used throughout the instruction manual to alert the user to potential
safety hazards as follows :

Warning
…
Notice when incorrect handling could cause the user's death or
serious injury.

Caution
…
Notice when incorrect handling could cause injury to the user or material
damage.
Even if the instructions do not have

Caution mark, there are some possibilities for a
serious situation. Follow the instructions.
Precautions
This tool is for setting the ball race on the front fork of a bicycle. Do not use for any other
purpose.
１ １ １ １
The collar of the C - 445 is designed to be applicable to usual 1 - 1/8” ball races. Make
sure that the collar contacts enough with the horizontal surface of the ball race to be
installed. If the collar is not applicable to the ball race, please purchase optional
C - 446 ATTACHMENT KIT.
The C - 446 ATTACHMENT KIT consists of three collars, one of which is applicable to
unique 1 - 1/8” ball races, and a shim which makes the clamp to bind 1” fork column.
Install the handles on the presser deeply
enough.
２ ２ ２ ２
Preparation
２
２ ２
２
1. Maintain proper posture when using this tool.
2. Wear gloves when using this tool.
3. Do not modify the C
-
445.
4. Do not use when cracks, breaks, wear or deformation is found in this tool.

Caution
３
３ ３
３
Apply a plenty amount of grease on the
thread of the presser guide. Screw the
presser guide into the presser until snug.
Grease Grease