HOZAN C-405, Инструкция по эксплуатации

Страница: 8 / 8

４
４ ４
４
C - 15 CHAIN LUBE
( Uses : Lubrication and rust
-
proofing for bicycle chain and derailleur)
NET : 110mL
Z - 294 OVERHAUL CLEANER
Flushes adhering oily dirt and grease as well as water - soluble dirt, easily
dissolving very dissimilar substances. NET : 500mL
C - 10 BIKE LUBE
(Uses : Lubricating and rust - proofing suspension fork, shifting lever, wires, derailleur, etc.)
NET : 420mL
C - 13 Li - Ca GREASE
( Uses : Lubricating, rust - proofing and waterproofing for headset, bottom bracket, shifting lever, wires,
derailleur, suspension fork, etc.) NET : 190mL
Relative products
16.03
Daily care
・
Remove the cut scrap from taps after use. Store avoiding shocks.
・
Lubricate periodically with an oiled cloth to prevent rusting.
Replacement parts/Option
・
C - 405 - 1 Taps BC1.37 X 24 (JIS) for right screwX1, reverse screw X 1
・
C - 405 - 2 Tap (Italian standard) X 1. Use two pieces.
Operation
６ ６ ６ ６
Remove the C
-
405. Clean out the cut scraps in the bottom bracket shell and wipe off
Always remove the both tap drivers R and L loosening gradually by turns. Removing
the one tap driver could damage the thread.
Use high quality, high viscosity cutting oil. Aerosol sprays are not suitable lubricants
and use of them will shorten the life of taps, reduce the quality of thread correction,
and may also damage the frame. If correcting an aluminum or titanium bottom bracket,
make sure the cutting oil is suitable for aluminum or titanium, respectively.
●
●

Caution
1 - 2 - 12 Saiwaicho, Naniwa - ku, Osaka 556 - 0021, Japan
Tel : +81-6-6567-3111 F a x : +81 - 6 - 6562 - 0024