Hoyt Theta Hz, Руководство по эксплуатации, Страница: 6 / 58

Green LED continuous ON Aux. Supply healthy condition
Output1 Voltage
Output1 Current
Output2 Voltage
Output2 Current
Green LED continuous ON
Red LED continuous ON
Green LED continuous ON
Red LED continuous ON
O/P 2
ON
O/P 1
LED
LED OPERATING
CONDITION
LED OPERATING
STATUS
6
1. Introduction
The Frequency Transducer is a DIN Rail / Wall mounted 43.5
X 65.5mm Transducer.
Input Frequency and Output Voltage/Current are displayed
on LCD and indicated by LED’s.
Frequency Transducer can be
configured and programmed at
site for the following : Input
parameters (i.e start, end and
elbow value of Input) and Output
Parameters(i.e as Voltage or as
Current and start, end and elbow
value of outputs).
The front panel has two push
buttons through which the user may scroll through the
output screens and configure the product.
1.1 LED Indication
The Frequency Transducer is used to measure and convert
Frequency input into proportional DC current or voltage
output signal.