Hoyt Formula Series Скачать руководство пользователя страница 19

WARRANTY

RECURVE BOW RISER AND RECURVE LIMB WARRANTY. PLEASE READ THIS DOCUMENT 

CAREFULLY. IT CONTAINS VERY IMPORTANT INFORMATION ABOUT YOUR RIGHTS AND 

OBLIGATIONS, AS WELL AS LIMITATIONS AND EXCLUSIONS THAT MAY APPLY TO YOU.

Hoyt warrants to the 

ORIGINAL OWNER that the Hoyt Recurve Bow Riser, will be free from defects 

in materials and workmanship for the lifetime of the product and Hoyt Recurve Limbs, will be free 

from defects in materials and workmanship for one year from date of purchase. Hoyt Recurve 

Bow Riser and Hoyt Recurve Limb warranty is regulated under the following terms and conditions:

1. The original owner must retain and provide an original and dated proof of purchase (sales 

receipt). 

THIS WARRANTY IS NOT TRANSFERABLE.

2. All risers and limbs must have the original serial number factory-attached to the bow. The serial 

number must remain legible. 

Exclusions from Warranty Coverage.

This Limited Lifetime Warranty covers normal use of the product, and Hoyt does not warrant and 

is not responsible for:

1. The use of aftermarket products/accessories that alter Hoyt’s specifications or design.

2. Damage to strings, damping materials, finish (including paint, anodize, powder coat and film-

dipped finishes) resulting from normal wear-and tear.

3. If bow shows sign of misuse, alteration, or mishandling, this warranty will be void.

4. Use of arrows weighing less than 5 grains per pound of draw weight will void the warranty.

5. Damage to ‘other’ accessories.

OBTAINING WARRANTY SERVICE

To obtain warranty service, you must return your bow to a Genuine Hoyt Retailer. The dealer can 

help to determine if Hoyt factory service is required or if the dealer can complete the repair. 

Genuine Hoyt Retailers may provide additional services and apply additional charges for service 

work performed by the dealer. If the bow must be returned to the factory, THE BOW OWNER IS 

RESPONSIBLE FOR THE FREIGHT CHARGES TO HOYT. Hoyt, in turn, will pay for the same return 

freight of the repaired product. Before any bow is returned to Hoyt, a Return Authorization (RA) 

number must be obtained through a Genuine Hoyt Retailer. Bows returned to the factory without 

a Return Authorization number obtained from a Genuine Hoyt Retailer may be denied warranty 

service. If Hoyt determines, in its sole discretion, that a bow qualifies for warranty repair, Hoyt will 

make every effort to repair the bow. Repairs may be performed with original parts when available. 

Hoyt reserves the right to make part substitutions on warranty coverage for any reason. If original 

parts are not available, suitable replacement parts/components may be used. If the Hoyt bow is 

not repairable, but qualifies for warranty coverage, Hoyt will replace the bow with a bow of similar 

feature and product class in Hoyt’s sole determination. THERE ARE NO OTHER WARRANTIES 

EXPRESSED OR IMPLIED THAT EXTEND BEYOND THOSE WRITTEN HERE. NO AGENT, EMPLOYEE 

OR REPRESENTATIVE OF HOYT OR ITS DEALERS HAVE THE AUTHORITY TO BIND HOYT TO ANY 

AGREEMENT NOT HEREIN STATED.

LIMITATION OF LIABILITY IN NO EVENT SHALL HOYT BE LIABLE UNDER ANY CIRCUMSTANCE 

TO YOU OR ANY OTHER PARTY FOR ANY SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES 

ARISING OUT OF OR IN ANY WAY CONNECTED WITH THE PRODUCTS, EVEN IF THE COMPANY 

OR ANY OF THE COMPANY AFFILIATES HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH 

DAMAGES. IN NO EVENT SHALL HOYT OR ANY HOYT AFFILIATE BE LIABLE TO YOU OR ANY 

OTHER PARTY FOR LOSS, DAMAGE, OR INJURY OF ANY KIND BEYOND THE BOW ITSELF.

16

Содержание Formula Series





















Отзывы: