Hoyt DOUBLE CHECK, Инструкция по эксплуатации

Страница: 10 / 20

POST-TESTING SAFETY PROOFING TEST
Always use a double check proofing unit after testing
The double Check proofing unit is an accessory which is
specially made for the Double Check (see double check
proofing unit user's manual).
It comprise of a rotary voltage selector.
Connect the leads of the double check proofing unit to the
tips of the double check.
Select the wanted voltage and press TEST.
When everything is correct;
1.The corresponding neon scale should lit.
2.The Led voltage detector should lit.
3.The Acoustic Voltage Detector should sounds.
If this is not the case, see Fuse replacement. Disregard
previous test results if these three conditions are not
correct.
Insulated Cord: Double Check uses a High Strength
cord between the poles. This is securely held by
customized strong Strength reliefs.
Interchangeable Tips: Double Check
uses a strong 8mm Standard thread to
attach all the different type of tips.
ACCESSORIES
Piercing cones tips, hooks, Non
Standard Tips can be made on
Request.
PRE-TESTING SAFETY PROOFING TEST
Always use a double check proofing unit before testing.
The double Check proofing unit is an accessory which is
specially made for the Double Check (see double check
proofing unit user's manual).
It comprise of a rotary voltage selector.
Connect the leads of the double check proofing unit to the
tips of the double check.
Select the wanted voltage and press TEST.
When everything is correct;
1.The corresponding neon scale should lit.
2.The Led voltage detector should lit.
3.The Acoustic Voltage Detector should sounds.
If this is not the case, see Fuse replacement.
Do not proceed if these three conditions are not
correct.
-8- -9-